Preparation of Supported Bimetallic Ce/Fe activated carbon for Desulfurization reaction
DOI:
https://doi.org/10.52716/jprs.v12i1.597Keywords:
Activated carbon, Desulfuraziation, Response surface methodology, Sulfur removal.Abstract
Activated carbon is loaded with 2 totally different metals: Ce and iron. The catalyst was characterised by Brunauer Emmett Teller (BET) and Fourier rework Infrared (FTIR). The discharged conditioner had the best area and pore volume of 1100 m2/g and 0.3 cm3/g, respectively.AC/Ce/Fe achieved the best kerosene adsorption performance (75%) though the lowest surface area and pore volume of 965.7608 m2/g and 0.39 cm3/g due to the acidic sites required for adsorption of sulfur compounds. Batch experiments with AC/Ce/Fe showed a high adsorption capacity. These experiments were designed by Minitab Response Surface Methodology RSM 2019. The Analysis of variance ANOVA shows that the concentration of H2O2 has most significant effect on the sulfur removal followed by reaction time and temperature, respectively. The model optimization was set its parameters additives 10 ml H2O2, temperature 80 0C and time 5 hr.
References
Li X, Luo X, Jin Y, Li J, Zhang H, Zhang A and Xie J 2018 Heterogeneous sulfur-free hydrodeoxygenation catalysts for selectively upgrading the renewable bio-oils to second generation biofuels Renew. Sustain. Energy Rev. 82 3762–97
Mohammed M I, Abdul Razak A A and Shehab M A 2017 Synthesis of Nanocatalyst for Hydrodesulfurization of Gasoil Using Laboratory Hydrothermal Rig Arab. J. Sci. Eng. 42 1381–7
Venkateshwar Rao T, Sain B, Kafola S, Nautiyal B R, Sharma Y K, Nanoti S M and Garg M O 2007 Oxidative desulfurization of HDS diesel using the aldehyde/molecular oxygen oxidation system Energy & Fuels 21 3420–4
Maciuca A-L, Ciocan C-E, Dumitriu E, Fajula F and Hulea V 2008 V-, Mo-and W-containing layered double hydroxides as effective catalysts for mild oxidation of thioethers and thiophenes with H2O2 Catal. Today 138 33–7
Gao Y, Lv Z, Gao R, Zhang G, Zheng Y and Zhao J 2018 Oxidative desulfurization process of model fuel under molecular oxygen by polyoxometalate loaded in hybrid material CNTs@ MOF-199 as catalyst J. Hazard. Mater. 359 258–65
Ghubayra R, Nuttall C, Hodgkiss S, Craven M, Kozhevnikova E F and Kozhevnikov I V 2019 Oxidative desulfurization of model diesel fuel catalyzed by carbon-supported heteropoly acids Appl. Catal. B Environ. 253 309–16
Wang C, Li A, Xu J, Wen J, Zhang H and Zhang L 2019 Preparation of WO3/CNT catalysts in presence of ionic liquid [C16mim] Cl and catalytic efficiency in oxidative desulfurization J. Chem. Technol. Biotechnol. 94 3403–12
Ye J, Wen J, Zhao D, Zhang P, Li A, Zhang L, Zhang H and Wu M 2020 Macroporous 3D carbon-nitrogen (CN) confined MoOx catalyst for enhanced oxidative desulfurization of dibenzothiophene Chinese Chem. Lett. 31 2819–24
Rezvani M A and Khandan S 2019 Synthesis and characterization of new sandwich-type polyoxometalate/nanoceramic nanocomposite, Fe2W18Fe4@ FeTiO3, as a highly efficient heterogeneous nanocatalyst for desulfurization of fuel Solid State Sci. 98 106036
Ammar S H, Kareem Y S and Ali A D 2018 Photocatalytic oxidative desulfurization of liquid petroleum fuels using magnetic CuO–Fe3O4 nanocomposites J. Environ. Chem. Eng. 6 6780–6
Muhammad Y, Shoukat A, Rahman A U, Rashid H U and Ahmad W 2018 Oxidative desulfurization of dibenzothiophene over Fe promoted Co–Mo/Al2O3 and Ni–Mo/Al2O3 catalysts using hydrogen peroxide and formic acid as oxidants Chinese J. Chem. Eng. 26 593–600
Subhan S, Rahman A U, Yaseen M, Rashid H U, Ishaq M, Sahibzada M and Tong Z 2019 Ultra-fast and highly efficient catalytic oxidative desulfurization of dibenzothiophene at ambient temperature over low Mn loaded Co-Mo/Al2O3 and Ni-Mo/Al2O3 catalysts using NaClO as oxidant Fuel 237 793–805
Ansari A A, Solanki P R and Malhotra B D 2009 Hydrogen peroxide sensor based on horseradish peroxidase immobilized nanostructured cerium oxide film 142 179–84
Ksapabutr B, Gulari E and Wongkasemjit S 2006 Sol – gel derived porous ceria powders using cerium glycolate complex as precursor 99 318–24
Music S 2007 ¨ ssbauer , FT-IR and FE SEM investigation of iron oxides precipitated from FeSO 4 solutions 836 445–53
Tian L, Li C, Li Q, Zeng G, Gao Z, Li S and Fan X 2009 Removal of elemental mercury by activated carbon impregnated with CeO 2 Fuel 88 1687–91
Saleh T A, Sarı A and Tuzen M 2016 graphene composite as a novel adsorbent Chem. Eng. J.
Li J, Hu B, Tan J and Zhuang J 2013 Deep oxidative desulfurization of fuels catalyzed by molybdovanadophosphoric acid on amino-functionalized SBA-15 using hydrogen peroxide as oxidant Transit. Met. Chem. 38 495–501
Lanju C, Shaohui G, Dishun Z, Jialin W and Tong M 2007 Oxidation of thiophenes over silica gel using hydrogen peroxide and formic acid Energy Sources, Part A Recover. Util. Environ. Eff. 30 370–6
Haghighat Mamaghani A, Fatemi S and Asgari M 2013 Investigation of influential parameters in deep oxidative desulfurization of dibenzothiophene with hydrogen peroxide and formic acid Int. J. Chem. Eng. 2013.
Yanxiu L, Hua S and Wenchao Z 2013 ” Oxidative Desulfurization of Model Sulfur Compound by Potassium Ferrate in the Presence of Phosphomolybdic Acid Catalyst China Pet. Process. Petrochemical Technol. 15 61–5
Downloads
Published
How to Cite
Issue
Section
