Corrosion Resistance Evaluation of Ni-Al \ YSZ Composite Coatings by An Electrochemical Investigation

الملخص

The composite coating is used to protect carbon steel pipeline from corrosion by Surface
modification using thermal spraying technique to enhance the corrosion resistance of carbon
steel. In this study the influence of sour hydrocarbon on carbon steel was investigated on
samples taken from Alloys with (API 5L) that used for oil transport pipe lines in North Oil
Company in Kirkuk fields and specifically from well (No. K-130) which the oil sample was
brought as well. The cermets coating (Ni-Al /ZrO2-8Y2O3) were prepared in different mixing
ratios of Yttria-Stabilized Zirconia (YSZ) with Ni-Al as a self-bonding. Several mixing ratios of
the binder (Ni-Al) were used to prepare the cermets for thermal spraying coating namely 15%
and 50%. In order to study the effect of roughness on the binding of the cermets and hence the
corrosion behavior of the carbon steel another specimen was mechanically abraded to a surface
finish 800 grit by SiC paper and the cermets mixing ratio (50% YSZ+ 50% Ni-Al) .The thermal
spraying gun was located in an angle of 90º in front of the carbon steel specimen and the distance
between them was 16 cm. The corrosion behavior of the modified surface in comparison with
untreated one was investigated by electrochemical techniques. Two electrochemical techniques
(DC and AC techniques) were used. The AC technique was potentiodynamic cyclic polarization
using Solatron 1287, USA) potentiostat/galvanostate. The EIS measurements for all coated
specimens show enhancement in the impedance parameters (total impedance |Z|, polarization
resistance (Rp) and the capacitance (C)) comparing to the uncoated one. The cermets thermally
sprayed coating show improvement in the corrosion parameters.