Study The Effect of The Main Variables on The Objectives of The Natural Gas Dehydration Plant by ASPEN-HYSYS v8.8

الملخص

In the NGD process, TEG dehydration is commonly employed to prevent corrosion and blockage of equipment, valves, and piping systems. TEG is frequently lost in the system during this procedure owing to vaporization and carryover. Therefore, it is necessary to study the affection of variables of the dehydration process the process was simulated with ASPEN-HYSYSV8.8 and the thermodynamic model was glycol-package; the process was validated by comparing the Plant results with the simulation results and demonstrating good acceptance. ASPEN-HYSYS conducted a sensitivity study to investigate the impact of variables on the main objectives. , as this study showed that not all of these variables have a strong effect, some of them have a weak effect, for example (wet gas pressure and same case of solvent pressure) and the rest of the variables have a strong effect on this process, so it must be taken into consideration by the station operators where this The changes were targeted because they are subject to change within the plant, and the highest value and the smallest value were taken according to the factory's parameters. As these variables are taken into account and the requisite improvements are made, the natural gas drying process will improve, and the dry gas requirements needed will improve, resulting in increased benefit.