Corrosion Mechanism and Countermeasures in Oil Refineries - Comprehensive Review

A. Alviz-Meza, S. I. Shah, V. Kafarov, and D. Y. Peña-Ballesteros, “Fireside corrosion of 9Cr-1Mo steel at high temperatures, in the acid flue gas from an oil refinery,” Corros. Sci., vol. 193, p. 109878, 2021, doi: https://doi.org/10.1016/j.corsci.2021.109878.

A. K. Algburi, “Effect of Heat and Mass Transfer on Corrosion of Carbon Steel in A Crude Oil Medium Using Corrosion Inhibitors Sodium Nitrate and Castor Oil under Different Circumstances,” J. Pet. Res. Stud., vol. 1, no. 36, pp. 71–91, 2022, doi: http://doi.org/10.52716/jprs.v12i3.525 Effect.

C. Subramanian, D. Ghosh, D. S. Reddy, D. Ghosh, R. Natarajan, and S. P. Velavan, “Stress corrosion cracking of U tube heat exchanger used for low pressure steam generation in a hydrogen unit of petroleum refinery,” Eng. Fail. Anal., vol. 137, p. 106245, 2022, doi: https://doi.org/10.1016/j.engfailanal.2022.106245.

A. Pongsakdi, P. Rangsunvigit, K. Siemanond, and M. J. Bagajewicz, “Financial risk management in the planning of refinery operations,” Int. J. Prod. Econ., vol. 103, no. 1, pp. 64–86, 2006, doi: https://doi.org/10.1016/j.ijpe.2005.04.007.

R. E. Sanders, “5 - Two highly destructive twenty-first century vapor cloud explosions: one in the United Kingdom and the other in Venezuela: Two massive explosion incidents with some significant similarities,” R. E. B. T.-C. P. S. (Fourth E. Sanders, Ed. Butterworth-Heinemann, 2015, pp. 125–147. doi: https://doi.org/10.1016/B978-0-12-801425-7.00005-4.

D. K. F. Alsultani, D. A. A. Jasem, and D. A. Ali, “Investigation of Corrosion Behavior of Low Carbon Steel Oil Pipelines,” J. Pet. Res. Stud., vol. 7, no. 1, pp. 73–90, May 2017, doi: https://doi.org/10.52716/jprs.v7i1.164.

D. Raheem, “Evaluation of Mixed Corrosion Inhibitors in Cooling Water System,” J. Pet. Res. Stud., vol. 3, no. 1, pp. 131–151, May 2012, doi: https://doi.org/10.52716/jprs.v3i1.67.

P. Sun, A. Elgowainy, M. Wang, J. Han, and R. J. Henderson, “Estimation of U.S. refinery water consumption and allocation to refinery products,” Fuel, vol. 221, pp. 542–557, 2018, doi: https://doi.org/10.1016/j.fuel.2017.07.089.

G. Rong, Y. Zhang, J. Zhang, Z. Liao, and H. Zhao, “Robust Engineering Strategy for Scheduling Optimization of Refinery Fuel Gas System,” Ind. Eng. Chem. Res., vol. 57, no. 5, pp. 1547–1559, Feb. 2018, doi: https://doi.org/10.1021/acs.iecr.7b02894.

L. O. Shtripling and V. V Bazhenov, “Emission Process System Organisation of Pollutants into the Atmosphere for Refinery Enterprises,” Procedia Eng., vol. 113, pp. 349–356, 2015, doi: https://doi.org/10.1016/j.proeng.2015.07.280.

J. Hoffmann, C. U. Jensen, and L. A. Rosendahl, “Co-processing potential of HTL bio-crude at petroleum refineries – Part 1: Fractional distillation and characterization,” Fuel, vol. 165, pp. 526–535, 2016, doi: https://doi.org/10.1016/j.fuel.2015.10.094.

H. P. Chang, I. Meric, D. Sudac, K. Nađ, J. Obhođaš, and R. P. Gardner, “Development of a method for on-line determination of chlorine impurity in crude oil by using fast neutrons,” Fuel, vol. 209, pp. 643–649, 2017, doi: https://doi.org/10.1016/j.fuel.2017.06.123.

J. T. Al-Naffakh, M. R. . Al-Qassab, B. T. . Neamah, and Z. M. H. . Al-Makhzoomi, “Experimental Investigation of Blending Acetylene with Iraqi LPG to Determine a Flame Stability Map”, Journal of Petroleum Research and Studies, vol. 12, no. 1, pp. 350-363, Mar. 2022. https://doi.org/10.52716/jprs.v12i1.607

W. N. L. W. Zakaria, K. E. Kee, and M. C. Ismail, “The effect of sensitization treatment on chloride induced stress corrosion cracking of 304L stainless steel using U-bend test,” Mater. Today Proc., vol. 29, pp. 75–81, 2020, doi: https://doi.org/10.1016/j.matpr.2020.05.697.

N. Hajilary, M. Rezakazemi, and A. Shahi, “CO2 emission reduction by zero flaring startup in gas refinery,” Mater. Sci. Energy Technol., vol. 3, pp. 218–224, 2020, doi: https://doi.org/10.1016/j.mset.2019.10.013.

K. B. Yoon, C. H. Byun, T. S. Nguyen, J. M. Yu, and G. M. Jeon, “Cracking of 5Cr steel tee-pipe during start-up operation in heavy oil upgrade refinery”, Eng. Fail. Anal., vol. 81, pp. 204–215, 2017, doi: https://doi.org/10.1016/j.engfailanal.2017.06.052.

M. Askari, M. Aliofkhazraei, and S. Afroukhteh, “A comprehensive review on internal corrosion and cracking of oil and gas pipelines”, J. Nat. Gas Sci. Eng., vol. 71, p. 102971, 2019, doi: https://doi.org/10.1016/j.jngse.2019.102971.

A. A. Fadhil et al., “Ceramics coating materials for corrosion control of crude oil distillation column: Experimental and theoretical studies”, Corros. Sci., vol. 162, p. 108220, 2020, doi: https://doi.org/10.1016/j.corsci.2019.108220.

G. Fulton and A. Lunev, “Probing the correlation between phase evolution and growth kinetics in the oxide layers of tungsten using Raman spectroscopy and EBSD,” Corros. Sci., vol. 162, p. 108221, 2020, doi: https://doi.org/10.1016/j.corsci.2019.108221.

S. Sadhukhan and U. Sarkar, “Production of purified glycerol using sequential desalination and extraction of crude glycerol obtained during trans-esterification of Crotalaria juncea oil,” Energy Convers. Manag., vol. 118, pp. 450–458, 2016, doi: https://doi.org/10.1016/j.enconman.2016.03.088.

G. Zahedi, S. Saba, M. al-Otaibi, and K. Mohd-Yusof, “Troubleshooting of crude oil desalination plant using fuzzy expert system”, Desalination, vol. 266, no. 1, pp. 162–170, 2011, doi: https://doi.org/10.1016/j.desal.2010.08.020.

P. P. Alvisi and V. F. C. Lins, “An overview of naphthenic acid corrosion in a vacuum distillation plant”, Eng. Fail. Anal., vol. 18, no. 5, pp. 1403–1406, 2011, doi: https://doi.org/10.1016/j.engfailanal.2011.03.019.

M. Zhang et al., “A review of bio-oil upgrading by catalytic hydrotreatment: Advances, challenges, and prospects”, Mol. Catal., vol. 504, p. 111438, 2021, doi: https://doi.org/10.1016/j.mcat.2021.111438.

A. T. Jarullah, I. M. Mujtaba, and A. S. Wood, “Economic Analysis of an Industrial Refining Unit Involving Hydrotreatment of Whole Crude Oil in Trickle Bed Reactor using gPROMS”, in 22 European Symposium on Computer Aided Process Engineering, vol. 30, I. D. L. Bogle and M. B. T.-C. A. C. E. Fairweather, Eds. Elsevier, 2012, pp. 652–656. doi: https://doi.org/10.1016/B978-0-444-59519-5.50131-3.

Y. Han et al., “Hydrotreatment of pyrolysis bio-oil: A review”, Fuel Process. Technol., vol. 195, p. 106140, 2019, doi: https://doi.org/10.1016/j.fuproc.2019.106140.

A. T. Jarullah, I. M. Mujtaba, and A. S. Wood, “Enhancement of Productivity of Distillate Fractions by Crude Oil Hydrotreatment: Development of Kinetic Model for the Hydrotreating Process”, in 21 European Symposium on Computer Aided Process Engineering, vol. 29, E. N. Pistikopoulos, M. C. Georgiadis, and A. C. B. T.-C. A. C. E. Kokossis, Eds. Elsevier, 2011, pp. 261–265. doi: https://doi.org/10.1016/B978-0-444-53711-9.50053-5.

M. Ramezanzadeh, G. Bahlakeh, and B. Ramezanzadeh, “Elucidating detailed experimental and fundamental understandings concerning the green organic-inorganic corrosion inhibiting molecules onto steel in chloride solution”, J. Mol. Liq., vol. 290, p. 111212, 2019, doi: https://doi.org/10.1016/j.molliq.2019.111212.

A. Samimi and A. Bagheri, “Studying and investigation corrosion in tube line and gas wells in oil and gas refinery”, Int. J. Chem., vol. 3, pp. 27–38, 2013.

H. D. Dettman, N. Li, and J. Luo, “Refinery corrosion, organic acid structure, and Athabasca bitumen”, 2009.

P. Jin, W. Robbins, and G. Bota, “High-temperature corrosion by carboxylic acids and sulfidation under refinery conditions—mechanism, model, and simulation”, Ind. Eng. Chem. Res., vol. 57, no. 12, pp. 4329–4339, 2018. https://doi.org/10.1021/acs.iecr.8b00250

K. Tak and J. Kim, “Corrosion effect on inspection and replacement planning for a refinery plant”, Comput. Chem. Eng., vol. 117, pp. 97–104, 2018. https://doi.org/10.1016/j.compchemeng.2018.05.027

L. O. Alemán-Vázquez, P. Torres-Mancera, J. Ancheyta, and J. Ramírez-Salgado, “Use of hydrogen donors for partial upgrading of heavy petroleum”, Energy & Fuels, vol. 30, no. 11, pp. 9050–9060, 2016. https://doi.org/10.1021/acs.energyfuels.6b01656

D. Dasgupta, J. Jasmine, and S. Mukherji, “Characterization, phylogenetic distribution and evolutionary trajectories of diverse hydrocarbon degrading microorganisms isolated from refinery sludge”, 3 Biotech, vol. 8, no. 6, pp. 1–18, 2018. https://doi.org/10.1007/s13205-018-1297-9

M. Packiaraj and K. K. S. Kumar, “High corrosion protective behavior of water-soluble conducting polyaniline–sulfonated naphthalene formaldehyde nanocomposites on 316L SS”, J. Alloys Compd., vol. 864, p. 158345, 2021. https://doi.org/10.1016/j.jallcom.2020.158345

A. da C. Rocha, F. Rizzo, C. Zeng, and M. P. Paes, “Duplex Al-based thermal spray coatings for corrosion protection in high temperature refinery applications”, Mater. Res., vol. 7, no. 1, pp. 189–194, 2004. https://doi.org/10.1590/S1516-14392004000100025

A. Davidy, “Large Eddy Simulation and Thermodynamic Design of the Organic Rankine Cycle Based on Butane Working Fluid and the High-Boiling-Point Phenyl Naphthalene Liquid Heating System”, Entropy, vol. 24, no. 10, p. 1461, 2022. https://doi.org/10.3390/e24101461

H. Wang, Y. Li, G. Cheng, W. Wu, and Y. Zhang, “A study on the corrosion behavior of carbon steel exposed to a H2S-containing NH4Cl medium”, J. Mater. Eng. Perform., vol. 27, no. 5, pp. 2492–2504, 2018. https://doi.org/10.1007/s11665-018-3355-1

J. N. Lepore, “The role of sulfur species in establishing the corrosion reactions in refinery metallurgies,” 2016. https://doi.org/10.7939/R34F1MQ0T

O. A. Habeeb, R. Kanthasamy, G. A. M. Ali, and R. M. Yunus, “Optimization of activated carbon synthesis using response surface methodology to enhance H2S removal from refinery wastewater”, J. Chem. Eng. Ind. Biotechnol., vol. 1, no. 1, pp. 1–17, 2017. https://doi.org/10.15282/jceib.v1i1.3715

M. Rabeea, R. Muslim, and A. Younis, “Preparation activated carbon from Biji refinery asphalt treated with sulfur and waste polymers”, Int. J. Appl. Eng. Res., vol. 12, no. 24, pp. 14783–14788, 2017.

S. Ramachandran, S. Lehrer, S. Chakraborty, and J. Jani, “Novel Scavenger Technology for Effective Removal of H2S from Produced Gas in Oilfield Applications”, in Abu Dhabi International Petroleum Exhibition & Conference, Paper Number: SPE-192885-MS, 2018. https://doi.org/10.2118/192885-MS

L. Zeng, “An Integrated Prediction Model for H2S/CO2 Corrosion in the Pipe of Refinery”, 2017. https://hdl.handle.net/1969.1/161412

H. Esmaeili and H. Mansouri, “Failure analysis of air cooler tubes in a gas refinery,” Int. J Sci. Engng. Invest, vol. 6, no. 62, pp. 191–195, 2017.

H. Jin, X. Chen, Z. Zheng, G. Ou, and W. Liu, “Failure analysis of multiphase flow corrosion–erosion with three-way injecting water pipe,” Eng. Fail. Anal., vol. 73, pp. 46–56, 2017. https://doi.org/10.1016/j.engfailanal.2016.12.005

M. R. Gonzalez, “Transitioning refineries from sweet to extra heavy oil”, in Springer Handbook of Petroleum Technology, Springer, 2017, pp. 915–930. https://doi.org/10.1007/978-3-319-49347-3_31

C. Subramanian, “Corrosion prevention of crude and vacuum distillation column overheads in a petroleum refinery: A field monitoring study,” Process Saf. Prog., vol. 40, no. 2, p. e12213, 2021. https://doi.org/10.1002/prs.12213

H. A. Al-Mazeedi, B. Al-Wakaa, and K. Ravindranath, “Window-type rupture of carbon steel pipe in a hydroprocessing plant of a petroleum refinery due to ammonium bisulfide corrosion”, Eng. Fail. Anal., vol. 120, p. 105089, 2021. https://doi.org/10.1016/j.engfailanal.2020.105089

R. T. Loto and K. Akpanyung, “Corrosion Inhibition Effect of Neem Leaf Oil Distillates on Low Carbon Steel in Dilute HСl and NH4Cl Acid Media,” in Materials Science Forum, 2021, vol. 1042, pp. 101–108. https://doi.org/10.4028/www.scientific.net/MSF.1042.101

D. Wolicka, W. Kowalski, and H. Boszczyk-Maleszak, “Biotransformation of phosphogypsum by bacteria isolated from petroleum-refining wastewaters”, Polish J. Microbiol., vol. 54, no. 2, pp. 169–173, 2005.

G. Coral and S. Karagoz, “Isolation and characterization of phenanthrene-degrading bacteria from a petroleum refinery soil”, Ann. Microbiol., vol. 55, no. 4, p. 255-259, 2005.

P. K. Baranwal and R. Prasanna Venkatesh, “Investigation of carbon steel anodic dissolution in ammonium chloride solutions using electrochemical impedance spectroscopy”, J. Solid State Electrochem., vol. 21, no. 5, pp. 1373–1384, 2017, doi: https://doi.org/10.1007/s10008-016-3497-8.

A. Samimi, B. Almasinia, E. Nazem, R. Rezaei, A. Hedayati, and M. Afkhami, “Investigating MIDEA Corrosion Treatment on Carbonic Simple Steel in Amin Unit of Isfahan Refinery,” Int. J. Sci. Investig. Fr., vol. 1, no.10, 2012.

N. D. Coble, “Corrosion philosophy-treat the source, not the symptom”, Paper presented at the CORROSION 2002, Denver, Colorado, April 2002.

F. Ropital, “Current and future corrosion challenges for a reliable and sustainable development of the chemical, refinery, and petrochemical industries”, Mater. Corros., vol. 60, no. 7, pp. 495–500, 2009. https://doi.org/10.1002/maco.200805171

S. A. . Zaidan, H. Y. Abed, S. J. Hussein, H. J. Mousa, and B. A. Abbood, “Protection of Oil Refinery Furnaces Bricks Using Coatings of Nano Zirconia-Glass Composites”, Journal of Petroleum Research and Studies, vol. 12, no. 1(Suppl.), pp. 168-185, Apr. 2022. https://doi.org/10.52716/jprs.v12i1(Suppl.).629

L. Dube, “Effectiveness of impressed current cathodic protection system on underground steel Engen refinery transfer lines system”, 2022. https://doi.org/https://doi.org/10.51415/10321/4112

S. Y. Ibrahim, “Cathodic protection system for crude oil storage tanks and water pipelines in the refinery”, Petroleum Science and Technology, vol. 23, no. 5–6, pp. 601–609, 2005. https://doi.org/10.1081/LFT-200032869

K. A. sattar Majbor, Q. M. Alias, W. F. Tobia, and M. A. Hamed, “Cathodic Protection Design Algorithms for Refineries Aboveground Storage Tanks”, jcoeng, vol. 23, no. 12, pp. 82–95, Nov. 2017. https://doi.org/10.31026/j.eng.2017.12.06

A. Groysman and I. Shvants, “Study of Efficiency of Industrial Corrosion Inhibitors for Cooling Water Systems at Oil Refinery Industry”, Paper presented at the CORROSION 2006, San Diego, California, March 2006.

J. Aslam, R. Aslam, M. Basik, and C. Verma, “Corrosion Inhibitors for Crude Oil Refinery Units”, in Sustainable Corrosion Inhibitors I: Fundamentals, Methodologies, and Industrial Applications, ACS Publications, pp. 207–221, 2021. https://doi.org/10.1021/bk-2021-1403.ch010

R. Aslam, M. Mobin, and J. Aslam, “Corrosion inhibitors for refinery industries”, in Environmentally Sustainable Corrosion Inhibitors, Elsevier, pp. 385–404 2022,. https://doi.org/10.1016/B978-0-323-85405-4.00004-5

A. Ghimire et al., “Bio-hythane production from microalgae biomass: key challenges and potential opportunities for algal bio-refineries”, Bioresour. Technol., vol. 241, pp. 525–536, 2017. https://doi.org/10.1016/j.biortech.2017.05.156