Effectiveness Enhancement of the Double Tube Heat Exchanger Using ZnO Nanofluid

Authors

  • Hussein Fadhil Kadhim The State Company for Gas Filling and Services, Ministery of Oil, Al-Qadisiyah

DOI:

https://doi.org/10.52716/jprs.v12i2.660

Keywords:

Double tube heat exchanger; Nanofluid; overall heat transfer coefficient; effectiveness; ZnO.

Abstract

In this study, the effect of adding zinc oxide nanoparticles to the reversible effect double tube heat exchanger with a length of 1.5 meters, an outer diameter of 19.0 mm, is made of copper material that is used by Nano water as a cold liquid. Zinc solid nanoparticles with a volume concentration of 3% were used with water as the base liquid. The cold nanoscale water flows into the real tube with a volume of 4 L/min which enters into the heat exchanger at 16°C, where the hot water flows into the separator of the heat exchanger representing a blank volume of 6 L/min. The Reynolds number range and flowrate ranges are 10000 to 20000 and 5 to 15 respectively. The heat exchanger was introduced at a temperature of 65°C. An improvement in the performance of the exchanger was shown in the case of using water with the addition of nanoparticles

References

A.M. Hussein, K.V. Sharma, R.A. Bakar, K. Kadirgama. The effect of cross sectional area of tube on friction factor and heat transfer nanofluid turbulent flow. International Communications in Heat and Mass Transfer 47 (2013): 49-55.

Bianco V. , Chiacchio F. , Manca O. , Nardini S. " Numerical investigation of nanofluids forced convection in circular tubes", Applied Thermal Engineering 2009, 29,3632–3642

A.M. Hussein, R. A. Bakar, K. Kadirgama, K. V. Sharma. Experimental measurement of nanofluids thermal properties." International Journal of Automotive and Mechanical Engineering 7 (2013): 850.

K. Azeez, A.F. Hameed, A. M. Hussein, Nanofluid heat transfer augmentation in a double pipe heat exchanger, AIP Conference Proceedings 2213, 020059 (2020); March 2020.

Mondragón R, Segarra C, Jarque J C, Julia J E, Hernández L, Martínez-Cuenca R Characterization of physical properties of nanofluids for heat transfer application, journal of Physics; 2012, Conference Series 395 , 012017.

K. Azeez, Z.A. Ibrahim, A.M. Hussein, Thermal Conductivity and Viscosity Measurement of ZnO Nanoparticles Dispersing in Various Base Fluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 66, Issue 2 (2020) 1-10.

Z.A. Ibrahim, Q.K. Jasim, A.M. Hussein. The Impact of Alumina Nanoparticles Suspended in Water Flowing in a Flat Solar Collector. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 65, Issue 1 (2020) 1-12.

R. Chand, G. Rana, A.K. Hussein. On the onset of thermal instability in a low Prandtl number nanofluid layer in a porous medium , Journal of Applied Fluid Mechanics , Vol. 8 , No.2 , 2015, pp : 265-272 .

S. Ahmed, A.K. Hussein, H. Mohammed, S. Sivasankaran. Boundary layer flow and heat transfer due to permeable stretching tube in the presence of heat source/sink utilizing nanofluids , Applied Mathematics and Computation ,Vol. 238, 2014, pp : 149-162.

R. Chand, G. Rana, A.K. Hussein. Effect of suspended particles on the onset of thermal convection in a nanofluid layer for more realistic boundary conditions, International Journal of Fluid Mechanics Research,Vol. 42, No. 5, 2015, pp : 375-390.

B.H. Chun, H.U. Kang, S.H. Kim, Effect of alumina nanoparticles in the fluid on heat transfer in double-pipe heat exchanger system, Korean J. Chem. Eng , 2008 , 25(5), 966-971 .

C.K. Mangrulkar, V.M. Kriplani, Nanofluid Heat Transfer-A Review, International Journal of Engineering and Technology,february 2013, Volume 3 No. 2.

A.M. Hussein, Thermal performance and thermal properties of hybrid nanofluid laminar flow in a double pipe heat exchanger, Experimental Thermal and Fluid Science 88 (2017): 37-45.

M. Akhtari, M. Haghshenasfard, M.R. Talaie. Numerical and experimrntal investigation of heat transfer of a-Al2O3/water nanofluid in double pipe and shell and tube heat exchangers", Numerical Heat Transfer,2013, Part A, 63: 941–958.

N.O. Kariem, Heat and Mass Transfer in Open Evaporative Cooling System Using Various Types of Fills in Oil Industry, Journal of Petroleum Research & Studies (2012): Volume 261, Issue 5th, Pages 93-121.

Downloads

Published

2022-06-21

How to Cite

(1)
Kadhim, H. F. . Effectiveness Enhancement of the Double Tube Heat Exchanger Using ZnO Nanofluid. Journal of Petroleum Research and Studies 2022, 12, 97-109.