New Development in Catalytic Reforming Process to Produce High Octane Gasoline

Authors

  • Khalid A. Sukkar Department of Chemical Engineering – University of Technology / Baghdad – Iraq
  • Hayam M. Abd Al-Raheem Petroleum Engineering Department-University of Misan / Misan – I raq
  • Layth S. Sabry Petroleum Engineering Department-University of Misan / Misan – I raq
  • Lattif A. Resym Labrotaries Depertment Al-Dura Refinery / Baghdad - Iraq

DOI:

https://doi.org/10.52716/jprs.v5i1.138

Keywords:

Heavy naphtha reforming; Pt/HY; Pt-Sn/HY; Pt-Sn-In/HY; and Pt-Sn- Ge/HY catalysts.

Abstract

    In this work, improved catalytic reforming reaction was carried out through using reaction promoters Sn, In and Ge. Four types of catalysts were prepared: Pt/HY, Pt-Sn/HY, and Pt-Sn-In/HY, and Pt-Sn-Ge/HY. The weight percentage of metals were 0.5 % for Pt and 0.1% for each of  Sn, In and Ge.

   The performances of catalysts (activity, selectivity and catalyst stability) were studied using Iraqi heavy naphtha  of Al-Dura refinery (Baghdad) as feedstock. The catalytic reforming unit consisted of a vertical tubular stainless steel reactor of 20mm internal diameter, 30 mm external diameter and 680 mm height. The operating pressure was atmospheric, and the operating temperatures varied between   425 to 525oC.  For all experimental runs: the weight hourly space velocity WHSV =2, the catalyst amount = 50 g, and H2/HC ratio =3.

   The results showed that the best reforming temperature over all four types of prepared catalysts was 475 oC  which gave the highest conversion of heavy naphtha to high octane products (aromatics and branched  isomers). It was concluded that the trimetallic catalyst Pt-Sn-In/HY, and Pt-Sn-Ge/HY show high selectivity to desired reforming products with 91.5% and 85% respectively. On the other hand, the Pt-Sn/HY and Pt/HY, catalysts show slectivities of 79% and 74% respectively.

   The results indicated a clear increase in catalyst stability with high resistance to coke formation for catalysts promoted with In and Ge as a third metal. Also, it was

noted that the production  of aromatics and isomers  are  increased  for both types of trimetallic catalysts Pt-Sn-In/HY, and Pt-Sn-Ge/HY under the same operating conditions.

Downloads

Published

2014-06-01

How to Cite

(1)
Sukkar, K. A. .; Abd Al-Raheem, H. M. .; Sabry, L. S. .; Resym, L. A. . New Development in Catalytic Reforming Process to Produce High Octane Gasoline. Journal of Petroleum Research and Studies 2014, 5, 223-244.