Numerical Study of Oil-water Separation in Inline Axial Hydrocyclone

Karima E. Amori; Zainab H.  Al-Ammar

doi:10.52716/jprs.v12i1.596

Authors

Karima E. Amori Dept. of Mechanical Engr., Univ. of Baghdad – College of Engr
Zainab H. Al-Ammar Dept. of Mechanical Engr., Univ. of Baghdad – College of Engr

DOI:

https://doi.org/10.52716/jprs.v12i1.596

Keywords:

CFD, hydrocyclone, oil-water separation, turbulence model.

Abstract

The fluid mixture hydrocyclone is an excellent tool for downhole oil/water separation (DOWS) for high water cut. In the present work the flow through inline axial inlet hydrocyclone is investigated computationally using ANSYS-FLUENT-19 software. The three dimensional continuity and momentum equations with SST k-omega turbulence model are used to simulate the strongly swirling, turbulent flow. Oil/water two phase mixture treated as the working fluid, water is considered as the primary phase and oil is the secondary phase. The considered oil volume fraction this work is 0.25 and flow split is 0.3 for three different flow rates of (14, 28, 56) m³/hr corresponding to Reynold's number range of (1.6 to 6.6)*10⁴. The pressure and velocity fields were analyzed in the whole hydrocyclone with core recirculation. The results are helpful to predict the flow motion inside the cyclone to estimate the oil/water separation process. The present work indicates that the water purity at cyclone exit was 90%, while the obtained oil purity was 38%.

References

M. Dirkzwager, "A New Axial Cyclone Design for Fluid-Fluid Separation," PhD. thesis, Delft University of Technology: Delft, Netherlands, 1996.

R. Delfos, S. Murphy, D. Stanbridge, Z. Olujić, and P. Jansens, "A design tool for optimising axial liquid–liquid hydrocyclones," Minerals Engineering, vol. 17, no. 5, pp.721–731, 2004.

S. Murphy, R. Delfos, M. Pourquie, Z. Olujić, P. Jansens, and F. Nieuwstadt, "Prediction of strongly swirling flow within an axial hydrocyclone using two commercial CFD codes," Chemical Engineering Science, vol. 62, no. 6, pp.1619–1635, 2007.

F. Ayinde, "A generalized relationship for swirl decay in laminar pipe flow," Sadhana, vol. 35, no. 2, pp.129–137, 2010.

L. Van Campen, R. Mudde, J. Slot, and H. Hoeijmakers, "A numerical and experimental survey of a liquid-liquid axial cyclone," International Journal of Chemical Reactor Engineering, vol. 10, no.1, 2012.

Y. Zhang, Y. Wang, Y. Zhang, L. Zhao, F. Li, F. Wang, and G. Zheng, "Design of Hydrocyclone With Axial Inlet and its Performance Used in Wellbore," ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering.

S. Shi, and J. Xu, "Flow field of continuous phase in a vane-type pipe oil–water separator," Experimental Thermal and Fluid Science, vol. 60, pp.208–212, 2015.

A. Rocha, A. Bannwart, and M. Ganzarolli, "Numerical and experimental study of an axially induced swirling pipe flow," International Journal of Heat and Fluid Flow, vpl. 53, pp. 81–90, 2015.

A. Rocha, A. Bannwart, and M. Ganzarolli, "Effects of inlet boundary conditions in an axial hydrocyclone. Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 39, no. 9, pp. 3425–3437, 2017.

Y. Fan, L. Ailan, G. Xueyan, "Numerical Simulation on the Performance of Axial Vane Type Gas-Liquid Separator with Different Guide Vane Structure," International Journal of Fluid Machinery and Systems, vol. 10 no.1, pp.86–98, (2017).

J. Hamza, H. Al-Kayiem, and T. Lemma, "Experimental investigation of the separation performance of oil/water mixture by compact conical axial hydrocyclone" Thermal Science and Engineering Progress, vol. 17, 100358, 2020.

S. Nunes, H. Magalhães, S. Neto, A. Lima, L. Nascimento, F. Farias, and E. Lima, "Impact of permeable membrane on the hydrocyclone separation performance for oily water treatment," Membranes, vol. 10, no. 11, pp.1–21, 2020 .

M. Zhan, X. Cheng, W. Yang, F. Zhang, P. Guo, and Q. Shen, "Numerical investigation on the swirler parameters for an axial liquid-liquid hydrocyclone," IOP Conference Series: Earth and Environmental Science, 675(1), 2021.

M. Zhan, W. Yang, F. Zhang, C. Luo, H. Wu, P. Guo, Q. Shen, X. Zeng, and C. Yan, "Experimental Investigation on the Separation Performance for a New Oil-Water Separator," Frontiers in Energy Research, 8(February), Article 608586, 2021.

X. Zeng, Y. Xu, L. Zhao, G. Fan, and C. Yan, "Numerical investigation on axial liquid-liquid separators with different swirl chambers," Chemical Engineering and Processing - Process Intensification, 161(February), 108324, 2021.

FLUENT 6.3 User's Guide, September 2006

L. Schiller, and A. Naumann, “About the basic calculations in gravity processing," Journal of the Association of German Engineers, vol.77, no. 318, 1933. In German.

D. Wilcox, "Reassessment of the Scale-Determining Equation for Advanced Turbulence Models," AIAA Journal, vol. 26, no. 11, pp. 1299-1310, 1988.

F. Menter, "Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications," AIAA Journal, vol.32, no.8, pp. 1598-1605, 1994.

K. Bhaskar, Y. Murthy, M. Raju, S. Tiwari, J. Srivastava, and N. Ramakrishnan, "CFD simulation and experimental validation studies on hydrocyclone," Minerals Engineering, vol. 20, no. 1, pp. 60–71, 2007.

M. Jiang, and L. Zhao, "Pressure and separation performance of oil/water hydrocyclones," Production and Operations Symposium, 2007.